The printing industry is an industry that has an important impact on China's national economy. Newspaper printing is the most common industry for printing technology. The biggest feature of newspaper printing and plate making is that the plate making speed is extremely high, the plate making volume is large and stable, and it is necessary to meet the newspaper. The need for plate making for industrial printing requires stable and high-speed printing plate making equipment. At present, the high-speed printing plate-making equipment promoted in China all comes from foreign advanced computer-to-plate CTP equipment. The high-speed CTP equipment in foreign countries currently monopolizes the high-speed plate-making market of the printing industry. This article will introduce you to the flexographic plate-making machine printing technology.
The software design of the ink-free printing and packaging laser plate-making machine involves the design of the PC-side control program of the host computer. If the operation control of the table and the control of the rotation angle of the grating are to be completed, the pvt motion mode must be adopted, and the user can pass the specified position. Or distance, termination speed and time period, thus achieving two-way movement of the platesetter.
The plate-making machine has obvious imaging power value. Only when the power reaches a certain amount of value, the transfer of the state of matter can be realized. Therefore, the thermal imaging exposure tolerance of the plate-making machine is generally very large, and the exposure is not observed in a large range. This feature has high practical value. The thermal imaging of the platesetter utilizes the thermal effects of photons, and the efficiency of imaging depends on the number density of photons, not just the energy carried by a single photon, which is why the thermal imaging technology of the platesetter has no energy accumulation. .
In addition to the CTP machine, we should also pay attention to the maintenance of the plate making machine, keep the surface of the plate making machine clean, and carry out a surface maintenance on the surface of the machine one day. The internal maintenance is carried out under the condition of changing the development, and the developing tank, the water tank, the glue tank and the glue stick are washed. Replace the core.
Article source address: http://
Medical Cosmetology Series,Medical Beauty Academy,Otc Cosmetology,Medical Beauty
Homesafe , https://www.homesafebio.com