With the expansion and demand for printing business, many companies have added new offset press equipment. The normative installation and debugging of new equipment is a problem that cannot be ignored by users. It is related to the normal use of new equipment and the major problems of product quality. Therefore, the author briefly discusses some problems that should be paid attention to in the installation and debugging of offset printing equipment.
First, the installation of the foundation must meet the standard requirements <br> I have witnessed such an example: There is a private printing plant purchased a J2205 Offset press, installed in the new plant for a short time there has been frequent The failure of the machine, the accuracy of the machine is reduced, and the failure during the printing process is also difficult to eliminate, and the product quality cannot be guaranteed.
In desperation, this offset press was resold to another user. After the buyer buys and installs the second mobile phone, the accuracy of the machine is obviously better than that of the original. The use performance is also relatively stable. In the printing process, the scene can be quickly eliminated and the quality of the printed product is normal.
The same two offset presses installed before and after use will have such a big difference in performance and quality. After analysis, the reason is that there is a difference in the foundation quality of the equipment installation. The foundation quality of the former installation does not meet the requirements and the foundation quality of the latter installation. And the installation quality is normal. Because the equipment foundation has a direct impact on the equipment installation quality, equipment accuracy and accuracy of stability and retention, as well as the quality of processed products and so on.
Therefore, equipment installation is an important part of the pre-management of the equipment. Prior to equipment installation, the design and production quality of the equipment foundation should be emphasized so that it meets the requirements of the national standards for power equipment basic design and meets the requirements for equipment installation. The normal use of the equipment and even the quality of the product is obviously of paramount importance.
Second, commissioning and leveling to maintain the stability of the norms of equipment installation should be in accordance with the equipment process floor layout and related installation requirements (such as the equipment product description on the installation requirements), the equipment to be installed on the basis of the norms, leveling, Stable, meet the requirements of installation specifications, and through debugging, operation, to meet the requirements of the production process.
The new offset press equipment has been used for car-carrying tests before leaving the factory. All technical indicators have been in compliance with the factory's standards. However, in view of the loading and unloading operations, the vibration of long-distance transportation and the technical level of installation, it will inevitably affect the accuracy of the machine. Therefore, after the normal installation of the new machine is completed, it is necessary to carry out debugging according to the technical indicators of the acceptance contract project and the machine specification. Under normal circumstances, after installation in place to level, the purpose of installation to find dry is to maintain its stability, reduce vibration, to avoid deformation, to prevent unreasonable wear, to ensure that the normal parts of the machine spare parts and coordinated operation, to ensure the accuracy of processing . Offset printing machine unit in the longitudinal direction (in the direction of the machine length) and horizontal (printing roller axis direction) level, etc., require clear specifications in the product specification, is the basis for leveling the machine after installation.
Third, several items that should be debugged 1. No-load operation. Including variable-speed empty-vehicle operation and empty-vehicle operation at the highest speed. Listen to the machine for abnormal noise and observe whether the body has any special vibration.
2. Test printing. Full version 50% dot printing (40-60l/cm). The general supplies of red and cyan printing are more obvious to observe, and it is better to see if the idea is strong and clear. When printing, it is best to attach a creed in order to observe the enlargement rate of each part of the network. At the same time, full-field printing is also carried out to see if the ink is even, flat and with no ink bars.
3. Registration situation. Observe the surrounding crosshairs, including the bite, tipping, and body registration, as well as the self-registration (that is, the printed sheet is overprinted once more), whether it meets the quality requirements of the machine factory.
4. Oil spill. It is generally more accurate to observe the machine after a normal operation for a day or two.
5. After the machine is used normally for one month or one quarter, the level of the impression cylinder, plate cylinder, and the vertical level of some parts are detected with a level gauge. Compared with the level of installation, the error variation is relatively large ( If you go beyond the requirements in the manual, you must analyze the cause carefully before using it.
First, the installation of the foundation must meet the standard requirements <br> I have witnessed such an example: There is a private printing plant purchased a J2205 Offset press, installed in the new plant for a short time there has been frequent The failure of the machine, the accuracy of the machine is reduced, and the failure during the printing process is also difficult to eliminate, and the product quality cannot be guaranteed.
In desperation, this offset press was resold to another user. After the buyer buys and installs the second mobile phone, the accuracy of the machine is obviously better than that of the original. The use performance is also relatively stable. In the printing process, the scene can be quickly eliminated and the quality of the printed product is normal.
The same two offset presses installed before and after use will have such a big difference in performance and quality. After analysis, the reason is that there is a difference in the foundation quality of the equipment installation. The foundation quality of the former installation does not meet the requirements and the foundation quality of the latter installation. And the installation quality is normal. Because the equipment foundation has a direct impact on the equipment installation quality, equipment accuracy and accuracy of stability and retention, as well as the quality of processed products and so on.
Therefore, equipment installation is an important part of the pre-management of the equipment. Prior to equipment installation, the design and production quality of the equipment foundation should be emphasized so that it meets the requirements of the national standards for power equipment basic design and meets the requirements for equipment installation. The normal use of the equipment and even the quality of the product is obviously of paramount importance.
Second, commissioning and leveling to maintain the stability of the norms of equipment installation should be in accordance with the equipment process floor layout and related installation requirements (such as the equipment product description on the installation requirements), the equipment to be installed on the basis of the norms, leveling, Stable, meet the requirements of installation specifications, and through debugging, operation, to meet the requirements of the production process.
The new offset press equipment has been used for car-carrying tests before leaving the factory. All technical indicators have been in compliance with the factory's standards. However, in view of the loading and unloading operations, the vibration of long-distance transportation and the technical level of installation, it will inevitably affect the accuracy of the machine. Therefore, after the normal installation of the new machine is completed, it is necessary to carry out debugging according to the technical indicators of the acceptance contract project and the machine specification. Under normal circumstances, after installation in place to level, the purpose of installation to find dry is to maintain its stability, reduce vibration, to avoid deformation, to prevent unreasonable wear, to ensure that the normal parts of the machine spare parts and coordinated operation, to ensure the accuracy of processing . Offset printing machine unit in the longitudinal direction (in the direction of the machine length) and horizontal (printing roller axis direction) level, etc., require clear specifications in the product specification, is the basis for leveling the machine after installation.
Third, several items that should be debugged 1. No-load operation. Including variable-speed empty-vehicle operation and empty-vehicle operation at the highest speed. Listen to the machine for abnormal noise and observe whether the body has any special vibration.
2. Test printing. Full version 50% dot printing (40-60l/cm). The general supplies of red and cyan printing are more obvious to observe, and it is better to see if the idea is strong and clear. When printing, it is best to attach a creed in order to observe the enlargement rate of each part of the network. At the same time, full-field printing is also carried out to see if the ink is even, flat and with no ink bars.
3. Registration situation. Observe the surrounding crosshairs, including the bite, tipping, and body registration, as well as the self-registration (that is, the printed sheet is overprinted once more), whether it meets the quality requirements of the machine factory.
4. Oil spill. It is generally more accurate to observe the machine after a normal operation for a day or two.
5. After the machine is used normally for one month or one quarter, the level of the impression cylinder, plate cylinder, and the vertical level of some parts are detected with a level gauge. Compared with the level of installation, the error variation is relatively large ( If you go beyond the requirements in the manual, you must analyze the cause carefully before using it.
billiards table series Co., Ltd. , http://www.gz-table.com