Shanghai Xinzhuang Instrument Co., Ltd. has an industry-recognized team of experts and first-class technology talents. With a deep understanding and mastery of scientific instrument technology, we operate a variety of freeze dryers and provide you with perfect pre-sales and sales. And after-sales service, professional technical advice and other services, Shanghai Xinzhuang look forward to your consultation and purchase!
Shanghai Xinzhuang teaches you how to operate the freeze dryer properly, as detailed below:
Boot operation:
1. Turn on the power cord and check to see if the main power indicator is blinking. The flashing indicates that the power is on.
2. Press the “Total Power†key for three seconds. At this time, the “Cold Trap Temperature†display window starts to display the cold trap temperature and release this button.
3. Press the "refrigerator" switch key, the chiller starts to run, and the chiller temperature gradually decreases. In order for the cold trap to have sufficient ability to adsorb moisture, the pre-cooling time should be no less than 30 minutes.
4. Press the “Vacuum Meter†to open the key. At this time, the vacuum digital display is “110†and the “103†indicator lights.
5. After the pre-cooling is finished, place the prepared items to be dried in a drying tray, cover the plexiglass cylinder, and tighten the inflation valve and the drain valve (on the right side panel) clockwise.
6. Press the “vacuum pump†to open the key, the vacuum pump starts working, the digital display drops below 20Pa, and the freeze-drying process begins. Note: When the vacuum pump starts working, press down on the plexiglass cover for a while, which is good for sealing.
7. Multi-manifold type should first close the rubber valve (put the valve core up), and when the vacuum reaches 20Pa or less, insert the freeze-dried bottle that has been pre-frozen into the lower interface of the rubber valve and rotate the plastic valve core down 180 degree. Note: At this time, the vacuum gauge will rebound, and the next bottle should be installed when the vacuum reaches 20Pa.
Shanghai Xinzhuang follows the principle of “survive by quality, develop by technology, benefit by management, and credibility by serviceâ€. We will do a good job in every set of equipment, every project, every link, strictly abide by the credibility and commitment. Excellent quality and service have won the trust of the majority of users. Because of the professional choice, Shanghai Xinzhuang welcomes you, our strong technical team to support you!
Small Tape Measure,Snap On Tape Measure,Fiberglass Measuring Tape,Construction Tape Measure
HENAN 95 MEASURING TOOLS CO.,LTD. , https://www.95tools.com