When purchasing a custom closet, the closet cabinet and the closet door are separately priced, and can also be different wardrobe brands. This should actually be an advantage of the custom closet, but this is also the cause of some disputes after the sale. So, when consumers encounter similar purchase problems, how to solve it?
Who is responsible for exceeding the standard after the combination is completed?
Problem: The doors and cabinets of different manufacturers are environmentally-friendly, and the installations are tested and exceeded the standards. Both of them have produced test reports, and no one is responsible for environmental protection.
The solution: This involves the issue of environmental protection superposition, that is, the environmental protection of the two products has just reached the standard, and it may exceed the standard when it is put together. It is recommended that consumers purchase products with the smallest amount of formaldehyde emission when the economy allows. Consumers can request to view inspection reports. Environmental protection inspections are divided into sampling inspection and delivery inspection. Consumers should pay attention to distinguishing between inspection reports when they check the business . If it is a inspection report, there will be similar "detection is only responsible for sending samples". The words, only the samples sent for inspection, can not confirm that the brand's products are environmentally friendly. In comparison, it is more reassuring to show the environmental performance of the products of the sampling inspection manufacturers.
What should I do if the tie is not open ?
Problem: The cabinet and the cabinet door are separately assembled, but it is found that the drawers such as individual drawers and baskets cannot be opened, or some cells are always blocked by the door leaf, and it is very inconvenient to take the clothes.
Reason: Experts said that this is mainly done before the cabinet and the cabinet door are not coordinated and matched. For example, a closet is a three-group cabinet that is divided into equal spaces, and the middle set has several drawers. The consumer happens to select a two-door sliding door. After the installation is complete, the middle set of drawers will never open, and this is only the simplest mismatch. The bigger the cabinet and the more components, the more serious the problem. This kind of problem mostly occurs on the sliding door. Although it is not a big problem, if the consumer is not aware of it beforehand and encounters an irresponsible business, the problem may be very serious. Because when the cabinet door and the cabinet are customized and produced at the same time, neither of the two merchants will be responsible for this problem.
The solution: If the cabinet has been completed, the designer of the cabinet must know the layout and size of the cabinet and design the cabinet door reasonably. If it is custom-made for the same period, it is best to lead the cabinet by the cabinet door . Because the cabinet door is an ornament in addition to the practical function, the consumer attaches great importance to its style and color, so it can select and finalize the specific style of the cabinet door. After the number and size of the door fans, the layout of the cabinet is rationally designed.
Related reading: Customized wardrobe pricing methods are many, which is the most cost-effective?
The door and the cabinet are all deformed. Who is it ?
Question: Who is responsible if the cabinet door and cabinet are deformed?
Reason: The problem of the panel and hardware of the cabinet will lead to the deformation of the cabinet, and the deformation of the cabinet will easily deform the cabinet door; in addition, the material of the frame of the cabinet door is too thin, the quality is not enough, or because of the plate The thermal expansion and contraction, the gravity of the glass droop, and after repeated push-pull, the door itself will also be deformed. If this happens simultaneously with the deformation of the cabinet, it is difficult to define the responsibility.
The solution: the enterprise "infinite" to meet the consumer's requirements for the width of the cabinet cell, drawers and other drawers, but this is one of the culprit of cabinet deformation. The width of the internal cell of the regular manufacturer cabinet and the size of the drawer are all specified, generally not more than 72 cm. In addition, the unevenness of the cabinet may also be deformed, so the back panel of the cabinet is essential. According to the weight of daily storage, generally speaking, the thickness of the backing plate is 5mm, which can meet the requirements. If it is too thin, it can not support, balance and increase the stability of the cabinet.
From the perspective of the cabinet door, try not to choose a glass sliding door with too much weight as the cabinet door. In addition, the alloy material of the door frame should reach a certain thickness. If it is too thin, it will not play a supporting role. If the height of the door exceeds 2.4 meters, generally, it is divided into several sections, and the waist line is set on the door. It is more secure to share the weight. Therefore, if the cabinet door cabinet is purchased separately, the consumer needs to be checked in both directions to ensure that the cabinet and the cabinet door are both qualified products, and the probability of deformation can be greatly reduced.
Further reading: Buying custom furniture with comparative method
more than 10 Years manufacture experience,Quality and delivery time guaranteed,Price and Service Supplied
Polyester twisted rope is highly resistant to ultra-violet rays, stays flexible and does not shrink or harden,does not float .Low stretch, abrasion resistant. Spliceable. Resists chemicals.
People that know about 8 Strand Nylon are aware of its greatness. Others will want to learn what a convenient addition this rope can be to their boat.
The difference between 3 Strand Nylon and 8 Strand Nylon is most apparent when its hauled on deck. Because of its construction, the 8 Strand Nylon will take up far less space than 3 Strand. It lays more compactly in your locker or bag and will use about half the space of the same amount of 3 Strand.
Want an eye on the end of your 8-strand Nylon Rope? Be sure to check out our custom splicing page and let our professional splicer how you would like them done. Splicing your rope, rather than tying a knot, is the strongest and safest way to create a loop on your rope.
GREAT FOR ANCHOR LINES.
Pp Braided Rope,8 Strand Pp Rope,8 Stand Ship Rope,Lifting 8 Stands Rope
YANGZHOU KENASI INTERNATIONAL TRADE CO. LTD. , https://www.knsmy.com