Precautions for using a constant current pump

**Constant Current Pump Working Principle | HL-2 Constant Current Pump | Medium Pressure Constant Current Pump | How a Constant Current Pump Works** The constant current pump, such as the HL-2 model, is designed to maintain a stable and consistent flow rate regardless of pressure changes. This makes it ideal for applications where precision and reliability are essential. Understanding its working principle and proper handling is crucial for optimal performance and longevity. 1. Always inspect the silicone tube before operating the pump to ensure there are no leaks. A damaged or improperly installed tube can lead to reduced efficiency or system failure. 2. The silicone tube should be securely in place but not overly tightened. Over-tightening may cause deformation or damage to the tube, leading to potential leaks or blockages. 3. Make sure the inlet end of the silicone tube is firmly pressed into the pump’s fitting. If necessary, use medical adhesive tape to reinforce the connection and prevent accidental dislodging. 4. In case of any leakage, clean the pumping groove and bushing immediately. Residual fluid can cause corrosion, contamination, or mechanical issues over time. 5. Avoid leaving the silicone tube disconnected for extended periods. After each use, rinse the tube thoroughly with distilled water (H₂O) to remove any residual substances that could degrade the material or affect future performance. Additionally, it's recommended to store the pump in a dry and cool environment when not in use. Regular maintenance checks, including inspecting the tubing, seals, and pump housing, will help prolong the life of the device. Always follow the manufacturer’s guidelines for specific models like the HL-2 to ensure safe and effective operation. By following these simple steps, you can maximize the efficiency and reliability of your constant current pump in various industrial or laboratory settings.

Loose Powder Container

We have many different kinds of round loose powder container and square loose powder container. And there are some Eyeliner Bottle with brush.

MOQ	12.000pcs
Delivery time	50-55days
Material	AS,ABS
Capacity	5ml & 10ml & 15ml
color	Injection color,spray coating color and UV metalizing color
logo	Silk screan and hot staping
Packing	paper carton
Place of Origin	Zhejiang

We promise out standing service tailored to meet your demands. Our products are favored by many customers all over the world and are sold in Europe, North America, South America and Asia.
We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Lipstick Case with good services for you !

Loose Powder Container, Loose Powder Case, Loose Powder Jar

ims Packaging Limited , https://www.ims-cosmetic-packaging.com