2.1 Liquid level height Please fill the liquid and then perform ultrasonic work. Dry burning will seriously damage the ultrasonic cleaner! Please fill at least 1/2 level of cleaning solution. The maximum amount of liquid should not exceed the level mark on the cavity.
2.2 Solvent type The chamber of the ultrasonic cleaner should not contain flammable liquid. For operation in flammable, organic solvents, choose Elma's targeted X-Tra LSM type cleaner.
Note: Ultrasonic waves accelerate the evaporation of liquids and create a mist on the surface of the liquid that can cause combustion when exposed to fire.
Do not store the acidic liquid directly in the stainless steel cleaning tank. Stainless steel cleaning tanks can be damaged in a short time due to crevice corrosion. Household cleaners often contain substances that cause such corrosive properties. Please select a special type of cleaning agent. If you are going to use a corrosive cleaning agent, we recommend using a plastic corrosion-resistant cleaning bath.
2.3 Cleaning method The cleaning object can not directly contact the bottom of the cavity, please operate in a stainless steel hanging basket. Please remove large particles, rust and other deposits in time, which will also cause damage to the cleaning tank.
If you use powder or granular cleaning media supplied by other suppliers, please ensure that the media is completely dissolved in the cleaning solution, otherwise the residual powder or particles will be covered on the bottom surface of the cleaning tank. Corrosion or formation of perforations in the underlying surface.
3.1 Cleaning solution Select the appropriate cleaning agent for the surface material and contaminants of the substance to be cleaned. Please select the most appropriate dose and most compatible reagents based on the recommendations and data given by the product specialist. If water is the usual medium, we recommend that you add the right amount of Elma detergent to the water to improve the cleaning effect. Elma chemical cleaners contain surfactants which reduce the surface tension of the media in the bath and are specifically designed for ultrasonic cleaning, resulting in a balanced distribution of ultrasound.
3.2 Level of liquid level The maximum level of liquid level should not exceed the mark of the cleaning tank, and the minimum should not be less than half of the height of the cleaning tank.
3.3 Removal of gas components The newly added cleaning solution will greatly affect the cleaning effect because of the dissolved gas components. Ultrasonic pre-ultrasound for a few minutes, followed by a formal ultrasonic cleaning, can effectively remove microbubbles in the cleaning medium. Can also be degassed in Degas degassing mode for 5-10 minutes, the effect is better. The degassed liquid will achieve a better gasification effect. And the dedicated degassing function will effectively improve the composition of the substances in the Elma cleaning agent. The use of the cleaning agent will ensure the ultrasonic cleaner has a longer service life.
3.4 Cleaning temperature Please select the appropriate cleaning temperature. The actual cleaning temperature will greatly affect the cleaning agent activity and cleaning effect. Please ensure adequate warm-up. Plus the ultrasonic cleaner's sound-reducing cover and temperature-controlled opening for full heating. In the temperature-controlled on mode, the liquid in the cleaning tank will evenly distribute heat while heating. After the preheating is sufficient, the ultrasonic cleaning is officially started. Method of operation: Set the temperature and ultrasonic time, long press the open button.
2.2 Solvent type The chamber of the ultrasonic cleaner should not contain flammable liquid. For operation in flammable, organic solvents, choose Elma's targeted X-Tra LSM type cleaner.
Note: Ultrasonic waves accelerate the evaporation of liquids and create a mist on the surface of the liquid that can cause combustion when exposed to fire.
Do not store the acidic liquid directly in the stainless steel cleaning tank. Stainless steel cleaning tanks can be damaged in a short time due to crevice corrosion. Household cleaners often contain substances that cause such corrosive properties. Please select a special type of cleaning agent. If you are going to use a corrosive cleaning agent, we recommend using a plastic corrosion-resistant cleaning bath.
2.3 Cleaning method The cleaning object can not directly contact the bottom of the cavity, please operate in a stainless steel hanging basket. Please remove large particles, rust and other deposits in time, which will also cause damage to the cleaning tank.
If you use powder or granular cleaning media supplied by other suppliers, please ensure that the media is completely dissolved in the cleaning solution, otherwise the residual powder or particles will be covered on the bottom surface of the cleaning tank. Corrosion or formation of perforations in the underlying surface.
3.1 Cleaning solution Select the appropriate cleaning agent for the surface material and contaminants of the substance to be cleaned. Please select the most appropriate dose and most compatible reagents based on the recommendations and data given by the product specialist. If water is the usual medium, we recommend that you add the right amount of Elma detergent to the water to improve the cleaning effect. Elma chemical cleaners contain surfactants which reduce the surface tension of the media in the bath and are specifically designed for ultrasonic cleaning, resulting in a balanced distribution of ultrasound.
3.2 Level of liquid level The maximum level of liquid level should not exceed the mark of the cleaning tank, and the minimum should not be less than half of the height of the cleaning tank.
3.3 Removal of gas components The newly added cleaning solution will greatly affect the cleaning effect because of the dissolved gas components. Ultrasonic pre-ultrasound for a few minutes, followed by a formal ultrasonic cleaning, can effectively remove microbubbles in the cleaning medium. Can also be degassed in Degas degassing mode for 5-10 minutes, the effect is better. The degassed liquid will achieve a better gasification effect. And the dedicated degassing function will effectively improve the composition of the substances in the Elma cleaning agent. The use of the cleaning agent will ensure the ultrasonic cleaner has a longer service life.
3.4 Cleaning temperature Please select the appropriate cleaning temperature. The actual cleaning temperature will greatly affect the cleaning agent activity and cleaning effect. Please ensure adequate warm-up. Plus the ultrasonic cleaner's sound-reducing cover and temperature-controlled opening for full heating. In the temperature-controlled on mode, the liquid in the cleaning tank will evenly distribute heat while heating. After the preheating is sufficient, the ultrasonic cleaning is officially started. Method of operation: Set the temperature and ultrasonic time, long press the open button.
our 2 seats Classic Car that with very large storage room at the back part, you can put many of your stuffs into it and there come with a key for the box for the safty, there are also have many colors for your choice for our 2 seats classic car,please inquiry us free should you need any further details.
2 Seaters Classic Car,Small 2 Seaters Classic Car,2 Seaters CE Approve Classic Car
Yongkang Jinghang Sightseeing Vehicle Co., Ltd. , https://www.jhgolfcarts.com