LHP Vertical Shielding Pump

1. Adopting a new low-speed shielded motor design and manufacturing advanced technology, applied in the field of liquid power, and launched a series of new products to meet the requirements of modern environmental protection. The basic performance parameters of the vertical shield pump series comply with ISO2858 international standard and JB/T6878.1-93 national standard. This product has advanced design, reasonable structure, stable performance, low noise and low temperature rise. It is the existing conventional horizontal type. An ideal replacement for centrifugal pumps and vertical line pumps. The performance range of this series of products: flow rate 3.8âˆ½1440m3/h, head 5âˆ½8m, with motor power 0.55âˆ½132KW, speed 1450r/min and 2900r/min. Product Features 1. The new low-speed shielding motor and medium self-circulation system ensure low noise, low vibration and low temperature rise.
2. The pump body adopts the pipeline structure. The inlet and outlet are the standard flange sizes with the same caliber and are on the same center line. They can be installed at any position on the pipeline like the valve. It is convenient, fast and stable, and meets different pipelines. Arrangement requirements.
3, electromechanical coaxial, the use of fully enclosed, no shaft seal (only static seal without dynamic seal) of the unique structure, to prevent the leakage of liquid, to ensure the transport of the medium without pollution to the environment.
4. The sliding bearing is used to replace the rolling bearing used in the conventional motor, no maintenance is required, the pump runs smoothly, and the vibration noise is extremely low.
5, installation and maintenance is convenient, no need to dismantle the pipeline system, as long as the pump body connection bolt mother can be removed to take all the rotor parts for inspection and maintenance.
6. The unique installation structure greatly reduces the footprint of the pump and saves the basic construction.
7. The user can carry out the series and parallel installation of the pump according to the actual use requirements.

Shower Sealing Strip is a unique concept that closes the gap between the shower screen/ glass panels, one of the easiest way to prevent water damage in your bathroom. A range of Shower Seals and Threshold made from high quality vinyls, available in transparent variations with the strength allows for a long lasting seal.

Specification

1. Material: PVC / PVC+ Magnet

2. Sealing Strip for shower door & bath screens: Glass to Wall or Glass to Floor

Translucent shower seals with soft bubble seal for interfaces between the bottom edge of the glass door and shower tray / top of the bath (horizontally) or between the wall and the edge of the glass door (vertically)

3. Glass Thickness: 6mm, 8mm, 10mm or 12mm

4. Length: 2200mm, can easily be cut to the required length , accept customized length

5. Application: Suits Shower enclosure, Bath Screen or Wet Room

Sealing Strip

Sealing Strip,Shower Door Plastic Seal,Shower Screen Seal,Shower Door Seal

Jiangyi Industrial Co., Ltd , https://www.cnjyhardware.com