The following is the industrial PDA brush machine guide (OCBS-D6000)
1> Please use TF card less than or equal to 4G
2> Before starting to brush, please put EBOOT and NK into the TF card, then put the TF card into the machine and turn it on to see if you can find the TF card content. (Because some TF cards are not of good quality, the machine is not recognized, so you need to buy a good TF card)
Brush process:
1"In the case of shutdown, press and hold the FN button, and if you don't let go, hold down the POWER button.
2" appears brush machine interface, select 1, brush E-BOOT, after completion, automatically shut down
3" Press and hold the FN button, if you don't let go, hold down the POWER button, the brush interface appears, select 2, brush NK, after completion, the calibration interface will appear automatically, manually calibrate the screen, enter the main interface
----- Complete the brushing process
2> Before starting to brush, please put EBOOT and NK into the TF card, then put the TF card into the machine and turn it on to see if you can find the TF card content. (Because some TF cards are not of good quality, the machine is not recognized, so you need to buy a good TF card)
Brush process:
1"In the case of shutdown, press and hold the FN button, and if you don't let go, hold down the POWER button.
2" appears brush machine interface, select 1, brush E-BOOT, after completion, automatically shut down
3" Press and hold the FN button, if you don't let go, hold down the POWER button, the brush interface appears, select 2, brush NK, after completion, the calibration interface will appear automatically, manually calibrate the screen, enter the main interface
----- Complete the brushing process
Wooden Trays,Natural Wood Tray,Wooden Plate,Wooden Display Tray
CSL WOOD ART FACTORY , https://www.cslwoodart.com