Wood door manufacturing process and requirements

Wooden doors, as the name suggests, are wooden doors. It can be divided into many types according to materials, processes and uses. Widely used in civil and commercial buildings and residential buildings.

Beautiful appearance

The surface paint film of wooden doors and windows should be smooth and bright, without quality defects such as falling, bubbles and wrinkles, without corrosion points, dead knots and disability; the wood used for the door and window cover should be coordinated with the wood and color of the door and window sash, and the veneer and The color difference of the wood lines cannot be large, and the tree species should be the same.

Door and window fan to be square

Can not be warped and deformed, the door and window sash can just be inserted into the door and window frame and match the door and window frame: if the door and window fan and the frame are large, mainly because the planing is not correct during the installation or the door and window frame is not perpendicular to the ground, the door and window can be The fan is removed and re-planed; if the door and window frames are not vertical, the gasket should be straightened in the frame.

The hinge should be positioned accurately

Firmly installed: If the hinge is not upright, the door and window fans will not match the frame, and the door and window switches will not be smooth. You can unscrew one screw for each hinge first, then adjust the fit of the door and window to the frame, and then tighten all the screws after the adjustment is correct. If the hinge screw is short, or when the screw is screwed in, the screw is not twisted, or the screw is twisted, the door and window fans will be strolled. The appropriate screws should be replaced. The screws must be straight when they are screwed. The screws should be nailed into 1/3 first, and the rest should be screwed in.

The opening and locking of the door lock should be smooth

The two parts of the lock on the door leaf and the door frame should be matched: the lock is not properly installed, which will cause the door leaf switch to be uncomfortable.

There should be a base material in the door and window cover

When the window cover is made of blockboard or MDF, the base plate should be fixed on the base keel of the window frame and then nailed; the door cover should be framed with wood, planed and straightened, and then assembled and mounted on the wall. Body, then cover the base board and veneer. Tap the side panel of the door and window cover by hand. If an empty drum sounds, it means that there is no base board such as a blockboard on the bottom layer, which should be removed and redone.

Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }

Nylon Raincoat

Nylon Raincoat, Ladies Nylon Raincoats, Mens Nylon Raincoat, Womens Nylon Raincoat

Zhejiang CC Industrial And Trading Co., Ltd , https://www.ccraincoats.com