In life, everyone must be very familiar with the socket, and the socket can make us safe and convenient to use electricity. Bull socket is the big brand of socket. It is the universal standard of quality socket products on the market today. It is believed that it is the preferred brand for many owners and friends to decorate sockets at home, but many people are not very familiar with socket wiring, or the wiring is not very standardized. Next, let's share the wiring of the bull socket.
How to connect the bull socket? First of all, be sure to know that it should be wired according to the correct connection of the left zero (N) right fire (L) to the ground (E), the fire line -L (red, yellow, green), the zero line -N ( Blue or black), ground line -E (yellow green).
Secondly, when calculating the load factor, sockets without fixed load are generally counted at 1000 watts, and ordinary sockets usually use 2.5 square millimeters of copper core wire.
Then, the grounding wire on the three-hole socket, the phase line on the right, the zero line on the left, and the socket on the left should be the same.
Finally, the wall switch socket must be securely installed and its connector needs to be tightened.
Precautions:
1, the switch should be set at about 13 to 150CM from the ground, about 15 to 20CM from the door frame. The wall switch with wainscoting should be at least 0.2M from the top of the board. When the switch socket is installed, it should be higher than 1.3M from the ground and not less than 0.3M when installing the socket.
2, in the bathroom, balcony installation wall switch socket should be installed with splash-proof socket, or equipped with a waterproof box, its faucet, stove top, above the bathtub and 20CM around the gas meter can not install its switch socket.
3. Two-hole sockets are strictly used in the electrical appliances in the home. In the bathroom, the bath switch has a large power, so it needs to stay in position; usually it needs to be plugged and unplugged.
4. When confirming the installation, all the wires are in full contact with the switch and socket rear seat wiring pile head.
5. When installing the wall switch socket, the switch has more hands in the opposite direction to open and close, the right object is more than the left hand, usually on the left side of the door, the entrance switch should use the best fluorescent type.
The above is the method of how to connect the bull sockets for everyone, I hope to help friends who have this need.
Non Woven Vest Bag,Reusable Non Woven Bag,Custom Non Woven Bag,Biodegradable Vest Bags
Chongqing Yilun Sanzi new packaging Co., Ltd , https://www.yilunmask.com